TURNING CENTERS

2014 OKUMA GENOS L200E-M, LIVE TOOLING, OSP-P200LA-R CNC CONTROL, 8” KITAGAWA B-208 CHUCK, 12 STATION TURRET, TAILSTOCK, COLLET NOSE, TOOL PRE-SETTER, SWING OVER BED 17.71″, SWING OVER CROSS SLIDE 7.87″, MAX WORK LENGTH 8.66″, X AXIS 6.49″, Z AXIS MM 9.65″, C AXIS 360° (0.001° INCREMENTS), SPINDLE SPEED MIN־¹ (RPM) 3,000, SPEED RANGES INFINITELY VARIABLE, SPINDLE NOSE JIS A2-6, SPINDLE BORE DIA MM Ø66, FRONT BEARING DIA. MM Ø100, TYPE V12 TURRET / NC, 12 STATION TURRET, OD TOOL SHANK MM 20X20, ID TOOL SHANK DIA MM Ø32, TURRET INDEXING TIME SEC 0.1, SPINDLE SPEED MIN־¹(RPM) 6,000 (STANDARD RADIAL MILL/DRILL HOLDER: 5,000 RPM), SPEED RANGE INFINITELY VARIABLE, FEED RATES RAPID TRAVERSE(X, Z ) M/MIN X:20, Z:25, RAPID TRAVERSE(C) MIN־¹(RPM) C: 200, (XZY) MM/REV 0.001~1,000.000, MAIN SPINDLE(30MIN/CONT) KW VAC7. 5/5.5, SPINDLE KW PREX 4.0/1.8 (25 MIN/CONT), AXIS DRIVE(X) KW 2.2, AXIS DRIVE(Z) KW 3.0, CHIP CONVEYOR, 2014 ATS EC-565 BAR FEEDER, S/N ME697

OKUMA CROWN 762E, OSP-700L CNC CONTROL, 8” CHUCK, TAILSTOCK, 12 STATION TURRET, MAX SWING OVER BED: 21.65″, MAX TURNING LENGTH: 19.68″, MAX NOMINAL PART LENGTH, MAX SWING OVER SADDLE: 15.75″, MAX TURNING DIAMETER: 10.63″, SPINDLE NOSE: JIS A2-6, SPINDLE SPEEDS: 75 – 4,200 RPM, NUMBER OF STEPS: STEPLESS, SPINDLE DRIVE: 12 HP, HOLE THRU SPINDLE: 2.44″, 12 STATION TURRET, TURRET TRAVELS (X, Z): 7.28″ X 20.47″, RAPID TRAVERSE RATE (X/Z): 590.55 / 787.4 IPM, MAX BAR CAPACITY: 2.00″, HYDRAULIC TAILSTOCK, TAILSTOCK TRAVEL: 18″, CHIP CONVEYOR, CNC ENHANCEMENTS AUTOBAR 300 FEEDER, S/N 0479

TREE TC 615 ZPS, 8” CHUCK, YASNAC CNC CONTROL, 8” CHUCK, 12 STATION TURRET, TAILSTOCK, TURBO CHIP CONVEYOR, SMW SPACE SAVER 2000 BARFEED, S/N 9-60-95-1012

VERTICAL MACHINING CENTERS

2006 HARDINGE BRIDGEPORT VMC 1000XP3, FANUC 18I-MB CNC CONTROL, XYZ TRAVELS: 40” X 20” X 20”, TABLE SIZE: 21” X 44”, CAT 40, 12,000 RPM SPINDLE, 30 ATC, 20 HP, CHIP CONVEYOR, S/N 320C168

OKUMA MX-45VAE, OSP-700M CNC CONTROL, XYZ TRAVELS: 30” X 18” X 17”, TABLE SIZE: 20” X 40”, CAT 40, 7,000 RPM SPINDLE, 20 ATC, 10 HP, HENNIG CHIP CONVEYOR, S/N 9227 

TREE VMC 1050/24, XYZ TRAVELS: 40” X 20” X 25”, TABLE SIZE: 50” X 22”, CAT 40, 8,000 RPM SPINDLE, 20 ATC, 15/20 HP, CHIP CONVEYOR, DYNAPATH CONTROL, S/N 9-20-99-1267, ATS 8” ROTARY TABLE

TOOLROOM EQUIPMENT

(2) 2009-2008 TRAK K3/KE KNEE MILLS, PRONTO TRAK EMX 3 AXIS CONTROL, XYZ TRAVELS: 31” X 16” X 16”, 50” X 10” TABLE, R8 SPINDLE TAPER, 60-4,200 RPM, POWER DRAW BAR, S/N’S 092DB62051, 083DF62042

(2) CADILLAC 1400G LATHES, 14” X 40” CC, 6” 3-JAW CHUCK, COLLET CLOSER, TAILSTOCK

HARRISON 16” X 72” ENGINE LATHE, 12” CHUCK, TAILSTOCK

2018 OKAMOTO LINEAR AR618B SURFACE GRINDER, GRIND-X, 6” X 18” WALKER MAGNETIC CHUCK, TABLE TRAVEL: 21” X 8” HAND FEED, SPINDLE SPEED: 3,180 RPM, S/N 48824

CHEVALIER FSG-2A618 SURFACE GRINDER, 6” X 18” WALKER MAGNETIC CHUCK

CHEVALIER FSG-618M SURFACE GRINDER, 6” X 18” KINJUNG MAGNETIC CHUCK, S/N

BROWN & SHARPE 6” X 18” SURFACE GRINDER

GROB 4V-18 VERTICAL BAND SAW, 24” THROAT, 28” X 24” TABLE, BLADE WELDER/GRINDER, S/N 3702

SPEED D BURR MODEL 40 TUMBLER, 32” X 16”, S/N 7054

RUTLAND HORIZONTAL BAND SAW, 7” X 16” CAPACITY

ECONOLINE & DEE SHOT BLAST CABINETS

BURR KING 482 2” SANDER

(2) BELT SANDERS

BALDOR DOUBLE END GRINDERS

DONALDSON DUST COLLECTOR

METAL FABRICATION MACHINERY

CHICAGO 810-C PRESS BRAKE, 50-TON CAPACITY, 10’ X 14 GAGE, S/N L12419

NIAGARA HL10 POWER SHEAR, 10’ CAPACITY

TW SPOT WELDER

OBI PUNCH PRESSES

MINSTER #6 PUNCH PRESS, 40 TON

THOMAS PUNCH, 160 TON, 28” X 36” BED, S/N 8939

DIAMOND PUNCH PRESSES, MODEL 31

FERMACUTE 20 TON PUNCH PRESS

ROUSSELLE OH PUNCH PRESS