2-DAY TIMED ONLINE AUCTION | CLOSES: TUESDAY, AUGUST 27 & WEDNESDAY, AUGUST 28 STARTING AT 10:00 AM PDT
TUESDAY, AUGUST 27 & WEDNESDAY, AUGUST 28 | 10:00 AM PDT
2-DAY PUBLIC ONLINE AUCTION
SURPLUS TO ONGOING OPERATIONS OF: ALL ENTERPRISES
TIMED ONLINE AUCTION: TUESDAY, AUGUST 27 & WEDNESDAY, AUGUST 28 LOTS START CLOSING AT 10:00 AM PDT EACH DAY
INSPECTION: MONDAY, AUGUST 26 FROM 9:00 AM TO 3:00 PM PDT
LOCATION: 10598 SILICON AVENUE, MONTCLAIR, CA 91763
2008 VERSA-LIFT, 2023 LOWRY, CATERPILLAR, HYSTER & ROYAL FORKLIFTS TO 140,000 LB CAPACITY, GROVE RT525E 25 TON ROUGH TERRAIN & BRODERSON 15 TON MOBILE CRANES, 2020 WILSON CURTAIN SIDE TRAILER, (2) 2017 DODGE RAM UTILITY & FLATBED TRUCKS, 2017 ETNYRE SLIDE BED EXTENDABLE TRAILER, 2012 DOONAN SPECIALIZED BLACK GOLD STEP DECK TRAILER, SNK 5-AXIS PROFILER, POREBA LONG BED LATHE, ENGINE LATHES, TRIPLE ACTION HYDRAULIC PRESS, VERSON WHEELON FLUID CELL FORMING PRESS, VERSON WHEELON BLADDER PRESS, KNUCKLE JOINT PRESSES, MILLER WELDERS, OVERHEAD CRANES TO 50 TON CAPACITY, RIGGING EQUIPMENT, (50) VIDMAR STORAGE CABINETS, MACHINE SHOP TOOLING & SUPPLIES, TRANSFORMERS, PALLET RACKING AND RELATED ITEMS
VERSA-LIFT 100/140, MODEL 85115, 140,000 LB CAPACITY, PROPANE, 24” LOAD CENTER, 138” LOWERED HEIGHT, 138” LIFT HEIGHT, 20” FREE LIFT, TWO STAGE MAST, 10 DEGREE FORWARD TILT, 7 DEGREE BACK TILT, GM V-6 DUAL FUEL ENGINE, HYDRAULIC FORK POSITIONER, 5.5” X 12” X 96” FORKS W/ 48” TAPER TO A 1.5” THICK TIP, LOAD SCALE, HYDROSTATIC TRANSMISSION HEAVY-DUTY OFF ROAD PLANETARY DRIVE AXLE, (9) REMOVABLE 4700 LB COUNTERWEIGHT SLABS, LOW PROFILE OPERATORS STATION, SOLID POLY TIRES, REMOTE CONTROL, HYDRAULIC BOOM ATTACHMENT, APPROX. OPERATING HOURS: 2353, S/N 02505
2023 LOWRY LK 450XDS, 45,000 LB CAPACITY, 3-STAGE MAST, 24” LOAD CENTER, 118” LOWERED HEIGHT, 130” LIFT HEIGHT, 40” FREE LIFT, 5 DEGREE FORWARD TILT, 5 DEGREE BACK TILT, GM VORTEX 5.7L PROPANE ENGINE, DUAL SWING OUT PROPANE TANKS, SIDE SHIFT & FORK POSITION INTEGRAL, 96” FORKS, ROCKWELL 75,000 LB CAPACITY, XTREME DUTY RATED PLANETARY DRIVE PLANETARY DRIVE AXLE, SOLID POLY TIRES, CAMERA SYSTEM, APPROX. OPERATING HOURS: 173, S/N LT3496
CATERPILLAR T200, 20,000 LB CAPACITY, SIDE SHIFT, 72” LONG FORKS, LPG, SOLID TIRE, S/N 71L554
CATERPILLAR T200, 20,000 LB CAPACITY, SIDE SHIFT, 96” LONG FORKS, LPG, SOLID TIRE, S/N 71L645
HYSTER, 15,000 LB CAPACITY, REBUILT LIFT & TILT CYLINDER, LPG
HYSTER, 15,000 LB CAPACITY, SIDE SHIFT, REBUILT LIFT & TILT CYLINDER, LPG
ROYAL T400B, 40,000 LB CAPACITY, LPG, 15′ 6″ LIFT HEIGHT, 30” LOAD CENTER, 88” FORK LENGTH, HYDRAULIC BOOM ATTACHMENT, S/N 588L172
MOBILE CRANES
GROVE RT525E ROUGH TERRAIN, HYDRAULIC, 25 TON, 4X4, 31′-71′ THREE EXTENSION FULL POWER BOOM, CUMMINS QSB5.9E DIESEL ENGINE, 58 GALLON CAPACITY FUEL TANK, FOUR HYDRAULIC TELESCOPING OUTRIGGER SYSTEM, S/N 224446
BRODERSON IC-200-2C, 15 TON CAPACITY, 4X4, 36′ BOOM LENGTH, 4 WHEEL STEER, DUAL PROPANE TANKS, S/N 84672
CURTAIN SIDE TRAILER
2020 WILSON AD-1080, ALUMINUM DROP DECK, 80,000 LB MAX DISTRIBUTED LOAD CAPACITY, TRIPLE AXLE, VIN: 1W1K54832M6630238
OVERHEAD BRIDGE CRANES
ACTION 30-TON, APPROX. 61’ SPAN TOP RUNNING DOUBLE GIRDER, TWIN HOOKS, S/N 3316928
DEMAG 20-TON, APPROX. 62’ SPAN TOP RUNNING DOUBLE GIRDER, DEMAG HOIST, RADIO CONTROLLED, S/N L00142
(2) ACE CRANE SERVICE 15-TON, APPROX. 50’ SPAN TOP RUNNING DOUBLE GIRDER, S/N’S S-10303A, S-10303B, EACH WITH DETROIT HOIST & CRANE COMPANY PENDANT CONTROLLED ELECTRIC WIRE HOIST
PACIFIC CRANE & HOIST 15-TON, APPROX. 65’ SPAN TOP RUNNING DOUBLE GIRDER, DEMAG HOIST, RADIO CONTROLLED, S/N 08P139
VERSON WHEELON FLUID CELL FORMING PRESS
VERSON WHEELON, MODEL 29000R-50-116, FLEX-DIE RUBBER PAD, S/N 27296, FLUID FORMING CAPACITY TONNAGE 29,000, FORMING PRESSURE 10,000 P.S.I., TRAYS: TWO TRAY SIZE AT TOP 50” X 116” (1,270MM X 2,946.4 MM) RIGHT TRAY AREA AT A 6 INCH (152.4MM) DEPTH 42” X 109” (1,079.5MM X 2,768.6MM), LEFT TRAY AREA AT A 10 INCH (254MM) DEPTH 37” X 104”, MOTOR DRIVES: ALL MOTORS WIRED 440 VOLTS, 3 PHASE, (2) EVACUATE HIGH PRESSURE PUMPS 75 HP & 150 HP, (1) ACC PUMP 30 HP, (1) PILOT PUMP 20 HP, (1) VACUUM PUMP 15 HP, (1) FILTER PUMP ¼ HP, CONTROLS: WIRED 115 VOLTS, OPERATOR CONTROL STATION LOCATED CENTER OF BARREL, (2) SIDE CONTROLS STATIONS LOCATED AT END OF EACH BARREL WITH EMERGENCY STOP BUTTONS, EQUIPPED WITH: (1) POWER UNIT AND OIL RESERVOIR, (1) NITROGEN INTENSIFIER PUMP, (2) THROW PAD ROLL-UP DEVICE FOR EACH TABLE, (1) ACCUMULATOR HYDRAULIC OIL STORAGE TANK, (1) FLUID CELL, (1) RUBBER PAD, ELECTRICAL STARTER PANELS, COMPLETE FACTORY SAFETY GUARDS, DIMENSIONS 342.16” L-R X 120”, F-B X 1873/8”HEIGHT WITH FILL LINES, MAIN CHAMBER WITH FILL LINES, HEIGHT ABOVE GROUND 161 7/8” (428.63MM), POWER UNIT AND OIL RESERVOIR F-B 96” X 178” (2,438.4MM X4,521.2MM, INTENSIFIER 33” X 33” X 132” HT. (38.2MM X 838.2MM X 3,352.8MM), ACCUMULATOR 80” DIAMETER X 186” HT. CONTROL PANEL 144” LR X 18” FB X 91” HT., APPROX. WT. 363,700 LBS, (2,032MM DIAMETER X 4,724.4MM HT.) 3,657.6MM FB X 457.2 FB X 2,311.4MM HT. (NOTE: PRESS IS DISASSEMBLED AND READY TO LOAD)
TRIPLE ACTION HYDRAULIC PRESS
CLEARING, 2,000 TONS X 60”, DEEP DRAW HYDRAULIC TRIPLE ACTION PRESS WITH WINDOWS, MDL. DH-1500-500-108, PUMP CAPACITY (TWO) 71.4 G.P.M. @ 3,000 PSI, MAIN MOTORS (TWO) 100 H.P. (T.E.F.C.)- 900 RPM, DIE CUSHION, UPGRADED PLC CONTROL, (NOTE: PRESS IS DISASSEMBLED, THE MACHINE IS READY FOR SHIPMENT)
BLADDER PRESS
VERSON 1260R-12-42, 1260 TON HYDRAULIC BLADDER PRESS, VERSON CONTROLS, 5000 MAX PSI, 12” X 42” PLATEN AREA, 3” PLATEN DEPTH, S/N 11399
CNC PROFILER
SNK VERTICAL MACHINING CENTER, MODEL FSP-120V, FANUC SERIES 16-M CONTROL, 24-STATION ATC, BT-50 TAPER SPINDLE, XYZ TRAVELS: 120” X 50” X 24”, A=+/-25 DEG, B=+/-25 DEG, 125” x 48” TABLE, CHIP CONVEYOR, COOLANT, S/N 451850
LONG BED ENGINE LATHES
POREBA TR155VSX8M, 60” X 264” CC, 4.5” HOLE THRU, 40” CHUCK, TAILSTOCK, (3) STEADY RESTS
DAINICHI DHK 75X400, 30” X 156” CC, 24” 4-JAW CHUCK, TAILSTOCK, STEADY REST, S/N 15863
PRESSES
KOMATSU MAYPRESS 1,000-TON KNUCKLE JOINT PRESS, MODEL MKN-1000, CIECO AUTOMATOR PRESS AUTOMATION CONTROL, WINTRISS AUTOSET 1500 LOAD ANALYZER, EATON VICKERS 10 HP HYDRAULIC POWER UNIT, 7.87” SLIDE STROKE, 23.62” DIE HEIGHT (DISTANCE BETWEEN BOLSTER PLATE AND SLIDE STROKE DOWN ADJUSTMENT UP), 3.93” SLIDE ADJUSTMENT, 12-24 SPM, BOLSTER: 35.43” L TO R, 35.43” F TO B, SLIDE: 35.43” L TO R, 35.43” F TO B, MILWAUKEE POWER ARM
KOMATSU MAYPRESS 800-TON KNUCKLE JOINT PRESS, MODEL MKN-800, 5.51” SLIDE STROKE, 29.52” DIE HEIGHT (DISTANCE BETWEEN BOLSTER PLATE AND SLIDE STROKE DOWN ADJUSTMENT UP), 2.36” SLIDE ADJUSTMENT, 29 SPM, BOLSTER: 33.46” L TO R, 39.37” F TO B, SLIDE: 29.92” L TO R, 31.49” F TO B, MILWAUKEE POWERED ARM, BANNER EZ-SCREEN LIGHT CURTAINS
ADVANCED MACHINE DESIGN 5 70-TON STRAIGHT SIDE PRESS, MODEL 570-2230, S/N 8301 CUSTOM STRAIGHTENING PRESS
WAREHOUSE STORAGE CABINETS
OVER (50) STANLEY VIDMAR, LISTA & LYON MULTI DRAWER CABINETS
MACHINE SHOP & WAREHOUSE SUPPLIES
CARBIDE END MILLS, HIGH SPEED PRECISION TWIST DRILLS, KEYWAY CUTTERS, 50 TAPER TOOL HOLDERS, METRIC HEX BOLTS, METRIC SOCKET CAP SCREWS, METRIC SET SCREWS, BEARINGS, SANDING BELTS & DISCS, BRONZE & BRASS PIPE FITTINGS, C-CLAMPS, RIDGID PIPE STANDS, SWITCHES, MOTORS, DYNAMOMETERS, LADDERS, WELDING TABLES, JUSTRITE FLAMMABLE CABINETS, HOSE REELS, SQUARE D TRANSFORMERS AND RELATED ITEMS
RIGGING EQUIPMENT
HYDRA SET 50,000 LB SCALE, 50-55 TON SHACKLES, CHAINS, MOVING DOLLIES, LIFTING CABLES AND RELATED ITEMS
PAYMENT TERMS:
NO DEBIT OR CREDIT CARDS! CASHIER’S CHECK, BUSINESS CHECK WITH BANK LETTER OF GUARANTEE, BANK WIRE TRANSFER. FULL PAYMENT MUST BE MADE NO LATER THAN 24 HOURS OF WINNING BID.
BUYER’S PREMIUM:
15% FOR ALL ONLINE PURCHASES.
REMOVAL:
ALL ITEMS MUST BE REMOVED NO LATER THAN THURSDAY, SEPTEMBER 12. NO EXCEPTIONS. PREPPING, REMOVAL, LOADING & TRUCKING IS THE RESPONSIBILITY OF THE BUYER.